We offer a full Calibration Service and Calibration Repair Service for a wide range of electrical test equipment from all major brands, including Megger, Seaward, Fluke, Robin, Greenlee and many more. We have also been approved as a Seaward Calibration Partner.
Our in-house calibration team provides a quick and comprehensive calibration service for a wide variety of electrical test instruments.
Electrical Instrument Calibration
We calibrate & repair all major brands of:
- Multimeters
- Clamp meters (up to 1000A AC/DC)
- Insulation Testers (up to 10kV)
- Installation Testers
- RCD Testers
- Loop Impedance Testers
- PAT Testers
- AC/DC Power Supplies
- Earth/Ground Testers
- High Voltage Injection Testers
- High Voltage Detectors
- Oscilloscopes (up to100MHz)
- Temperature calibration is also possible
Instrument Calibration – Quality Control
All equipment is calibrated in accordance with our Calibration Procedures, using certified calibration equipment traceable to national/international standards. You will be issued with a detailed calibration certificate outlining the calibration results.
We are an ISO9001:2015 company and work to keep our standards as high as possible through annual testing and internal improvement processes.
Powerpoint Engineering Ltd has been assessed by the National Standards Authority of Ireland (NSAI), and complies with the provisions of the standards Quality Management System I.S. EN ISO 9001:2015 and Records Management System ISO 10012-2013.
In addition to this, all of our calibrations are carried out in accordance with ISO 10012:2013 as certified by NSAI. This ISO standard specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements. It specifies quality management requirements of a measurement management system that can be used by an organisation performing measurements as part of the overall management system, and to ensure metrological requirements are met. Powerpoint Engineering Limited has been assessed and certified by the NSAI to conform with the provisions of the standard Measurement Management Systems to ISO 10012:2013.
 |
 |
 |
 |
 |
 |
| NSAI Quality Management ISO 9001:2015 |
NSAI Occupational Health and Safety Management ISO 45001:2018 | NSAI In monitoring of the Measurement Management System within the calibration lab |
Registered Training Provider | Achilles Level 3 Supplier | WEEE Ireland Cert Number POW400 |
Not exactly what you are looking for? Visit our www.calibrationlab.ie website for further information or feel free to contact us for advice and specific requirements, we’re happy to help.
Related Products
