SebaKMT HPA 100 AC / HPA 130 DC

SebaKMT HPA 100 AC / HPA 130 DC

SKU: HPA 100 AC / HPA 130 DC

Powerful High-Voltage test system up to 100 kVrms AC 50 Hz

The AC Test Set HPA 100 is a very powerful test set which has been designed for installation in cable test van. It can be used for testing of cable systems and for burning down high-resistance cable faults with a high breakdown voltage. The test set can be equipped with a rectifier attachment for DC testing up to 130 kV. Since the own noise level of the test system is below 1pC, it is also suitable as a voltage source for PD measurements.

The control unit HSG 10 – 1 is used for controlling the HTR 100 high voltage transformer. The HSG 10 – 1  control unit consists of a variac, test meters (for displaying the current and voltage), operational components (for high voltage spark gap), a timer (for the test duration) and a safety circuit.

The low voltage winding can be constantly excited from zero to the maximum value so that a certain output is accessible for a pre-determined period. The operating duration will depend largely on the application. It usually ranges from a few minutes to constant operation.

The test transformer is single-pole insulated and mounted in an insulated cylinder with top and bottom flanges. The insulation material is primarily oil impregnated paper.

SebaKMT HPA 100 AC / HPA 130 DC Features Include:

  • Powerful test and burning system
  • Continuous testing with AC voltages up to 100 kVrms at 5 kVA
  • Own noise level below 1pC
  • Built-in overcurrent protection
  • DC testing up to 130 kV with optional rectifier

SebaKMT HPA 100 AC / HPA 130 DC Datasheet

Not exactly what you are looking for? Contact us at with your exact requirements, we’re happy to help.


SebaKMT HPA 100 AC / HPA 130 DC Datasheet

For additional technical details about the SebaKMT HPA 100 AC / HPA 130 DC please refer to the product datasheet. Please note that you would need PDF reader to open the file.