Fluke T5-1000 Voltage, Continuity and Current Meter
The Fluke T5-1000 is a compact electrical tester that checks voltage, continuity and current with a single tool. Select volts, ohms or amps and the tester does the rest. Its OpenJaw current feature lets you read current up to 100 A without breaking or interfering with the circuit, so you can take a reading in seconds rather than landing leads on a live conductor.
Brand and standards
Fluke is one of the most trusted names in electrical test and measurement, and Powerpoint Engineering is an authorised Fluke distributor in Ireland. All inputs on the T5-1000 are protected to IEC 61010-1 CAT III 600 V, and the tester is offered in 600 V and 1000 V models to suit different installations. Because it is a digital instrument rather than a solenoid type, it can stay connected far longer while you track an intermittent fault.
Applications
The T5-1000 suits everyday verification and fault-finding work where one quick, reliable reading matters:
- Confirming presence or absence of AC and DC voltage before work
- Checking continuity of conductors, fuses and connections with the audible beeper
- Reading load current up to 100 A using OpenJaw, without opening the circuit
- General resistance measurement on circuits and components
Specifications
|
Specification |
Fluke T5-1000 |
|
Voltage measurement |
AC and DC, digital resolution |
|
Current (OpenJaw) |
Up to 100 A |
|
Resistance |
Up to 1000 ohm |
|
Continuity |
Audible beeper |
|
Safety rating |
IEC 61010-1 CAT III 600 V |
|
Models |
600 V and 1000 V |
What's in the box
- Fluke T5-1000 tester
- 4 mm detachable SlimReach probes
- Instruction sheet
The detachable test leads stow neatly in the back of the tester and can take optional accessory test clips and specialty probes. An optional H5 holster clips the tester to your belt.
FAQs
How does the OpenJaw current measurement work?
The open jaw on the T5-1000 reads current up to 100 A by being placed around a single conductor, so you never have to break the circuit or land test leads in series. It is a fast, safe way to confirm load on a cable while it stays energised.
Should I choose the 600 V or 1000 V model?
The T5-1000 is available in 600 V and 1000 V versions. Pick the rating that matches the circuits you work on most. If you are unsure, talk to our team and we will help you match the tester to your installation and working voltages.
Can Powerpoint Engineering calibrate my Fluke T5-1000?
Yes. Our in-house calibration and repair laboratory services Fluke testers and issues traceable certificates. Speak to our calibration team to book your instrument in.
To compare models, view our full range of digital multimeters, or talk to our team about calibration and training for your test equipment.
