Fluke T150 Voltage and Continuity Meter

Fluke T150 Voltage and Continuity Tester

The Fluke T150 is the top of the Fluke T-series voltage and continuity testers, built for fast, accurate verification on live electrical installations. It combines visual, audible and vibration feedback in one rugged tool, and adds resistance testing up to 1999 ohms, so electricians can confirm presence of voltage, check continuity and take a basic resistance reading without reaching for a second instrument.

Brand and standards

Fluke is one of the most trusted names in electrical test and measurement, and Powerpoint Engineering is an authorised Fluke distributor in Ireland. The T150 carries a CAT IV 600 V and CAT III 690 V safety rating and is built to comply with both HSE GS 38 (tip caps) and IEC EN 61243-3:2010, so it is suited to work right up to the origin of the installation. The rugged housing is designed for long, hard-wearing service in the field.

Applications

The T150 covers the everyday voltage proving and continuity checks an electrician carries out on site:

• Proving dead and confirming presence of voltage before work begins
• Fast identification of live conductors with single-phase voltage indication
• Checking phase rotation on three-phase systems
• Continuity testing using audible, visual and vibration feedback
• Testing RCDs remotely by drawing extra current to trip the device intentionally
• Basic resistance checks up to 1999 ohms

Specifications

Key features

• 4-way indication: LED lights, backlit LCD, audible beeper and vibration feedback
• Audio-off function for testing in discreet areas
• Detects voltage even with discharged batteries, plus low-battery indication
• Display Hold to freeze test results
• Built-in electric torch for low-light environments
• WearGuard insulation that shows damage to the probe leads
• Probe tip protector and storage accessory that doubles as an extra hand at the socket

FAQs

What is the difference between the T150 and the T130?

The T150 sits at the top of the range and shares the same build quality as the T130, but it incorporates all the advanced features of the T130 and more, including resistance testing up to 1999 ohms and the full 4-way indication system. If you want the most capable tester in the T-series, the T150 is the one to choose.

Can the T150 trip an RCD?

Yes. The two-button control lets you draw more current from the circuit under test to intentionally trip a Residual-Current Device remotely. This is handy for confirming RCD operation as part of routine inspection and testing without needing a separate dedicated instrument.

Can Powerpoint Engineering calibrate my Fluke T150?

Yes. Our in-house calibration and repair laboratory services Fluke testers and issues traceable certificates. Speak to our calibration team to book your T150 in and keep it compliant for site work.

To see the full range, view our digital multimeters and testers, or talk to our team about calibration and training for your instruments.