Fluke 772 Milliamp Clamp Meter

Fluke 772 Milliamp Clamp Meter

The Fluke 772 Milliamp Clamp Meter measures and sources 4 to 20 mA process loops without breaking the circuit, so you can test and troubleshoot analog control signals without removing a wire or bringing the system down. It is built for instrumentation and control technicians who maintain PLCs and control-system analog I/O in the field.

Brand and standards

Fluke is one of the most trusted names in electrical test and measurement, and Powerpoint Engineering is an authorised Fluke distributor in Ireland. The 772 reads 4 to 20 mA loops in place with first-in-class 0.2 % accuracy, so the readings you log match the signal the controller actually sees. As an authorised distributor, Powerpoint also supports and calibrates Fluke instruments in its own laboratory.

Applications

The 772 suits day-to-day work on process and control loops:

• Measuring 4 to 20 mA signals without interfering or breaking the loop
• Checking analog input/output on Programmable Logic Controllers and control systems
• Troubleshooting intermittent or erratic 4 to 20 mA loops
• Measuring older control systems from 10 to 50 mA using the 99.9 mA range
• Reaching tight, awkward locations using the removable clamp and extension cable

Specifications

Key features

• Removable clamp with extension cable for measurements in tight and awkward locations
• Measurement Spotlight to illuminate wires in dark spots
• Hold function to freeze measurement data on the screen
• Energy-saving functions for extended battery life

The kit includes the meter, four AA batteries (installed), a soft case, TL75 test leads, the AC 72 detachable clip, TL 940 mini hook test leads, an instruction sheet, and a hanging tool.

FAQs

Can the Fluke 772 measure a 4 to 20 mA loop without breaking it?

Yes. The 772 clamps around the conductor to read 4 to 20 mA signals in place, so you do not have to remove a wire or break the loop. That lets you gather mA measurements and troubleshoot without interfering with the circuit or bringing the system down.

What accuracy and resolution does the Fluke 772 give?

The 772 offers first-in-class 0.2 % accuracy with 0.01 mA resolution and exceptional sensitivity. That makes it well suited to checking analog input and output on PLCs and control systems, where small drifts in a 4 to 20 mA signal matter.

Can Powerpoint Engineering calibrate my Fluke 772?

Yes. Our in-house calibration and repair laboratory services Fluke clamp meters and issues traceable certificates. Speak to our calibration team to book a slot for your 772.

To compare models, view our full range of current clamps and accessories, or talk to our team about calibration and training for your instruments.