Fluke 28 II Rugged Digital Multimeter
The Fluke 28 II is a rugged True RMS digital multimeter built for precision measurement in the toughest industrial environments. It is the meter for technicians who work where a standard DMM would not survive: tested to a 3 metre drop, sealed to IP67 against dust and water, and rated to operate from -15 degrees C to +55 degrees C, with an extended -40 degrees C capability for up to 20 minutes. Where durability, reliability and accuracy all matter, the 28 II sets the standard.
Supplied by Powerpoint Engineering as an authorised Fluke distributor, this listing is for the instrument without a calibration certificate. Our in-house laboratory can supply traceable calibration when you need it.
What the Fluke 28 II measures
- True RMS AC voltage and current for accurate readings on non-linear loads
- Voltage and current up to 1000 V and 10 A, AC and DC
- A 20,000 count display for precise measurements
- Resistance, continuity, capacitance, frequency and temperature
Built to survive the job
The 28 II is designed and tested to keep working where conditions are against it. The IP67 seal keeps dust and water out, the housing takes a 3 metre drop, and the wide temperature range means it performs in a cold store or a hot plant room without complaint. That ruggedness is the whole point: a meter is only useful if it survives the environment you take it into.
Specifications
|
Specification |
Fluke 28 II |
|
Type |
Rugged True RMS digital multimeter |
|
Protection |
IP67, tested to a 3 m drop |
|
Temperature |
-15 to +55 degrees C operating, -40 degrees C for up to 20 minutes |
|
Measurement |
Up to 1000 V and 10 A, AC and DC, True RMS |
|
Resolution |
20,000 counts |
|
Other functions |
Resistance, continuity, capacitance, frequency, temperature |
Where the 28 II fits in the range
The 28 II is the rugged choice for standard, non-classified areas. If your work takes you into an ATEX hazardous area, the intrinsically safe Fluke 28 II Ex adds the certification needed for zones 1 and 2.
Calibration and support
- Supplied and supported in Ireland by an authorised Fluke distributor
- Available with or without a calibration certificate
- Calibrated and repaired in our own lab with traceable certificates
Because this listing ships without a certificate, the simplest route to compliance is to calibrate it through our calibration and repair laboratory. Full figures are on the official Fluke 28 II datasheet and across the wider Fluke digital multimeter range.
FAQs
How rugged is the Fluke 28 II?
It is sealed to IP67 against dust and water, tested to a 3 metre drop, and rated from -15 to +55 degrees C, with a -40 degrees C capability for up to 20 minutes. It is built for the harshest standard-area conditions.
What is the difference between the 28 II and the 28 II Ex?
The 28 II Ex adds intrinsic safety certification for ATEX hazardous zones 1 and 2. The standard 28 II has the same rugged build and measurement set but is not certified for use in classified flammable atmospheres.
What does "without calibration" mean for this Fluke 28 II?
It means the meter is supplied without a calibration certificate. The instrument is identical; if your work needs traceable evidence, we can calibrate it in our own lab and issue a certificate.
