The Fluke 28 II Ex Intrinsically Safe True-rms Digital Multimeter is an unique tool. If you have heard about the standard Fluke 28 II you will be even more impressed with this version – the Fluke 28 II Ex. It is designed to utilise all those extensive features as the 28 II – ruggedness, toughness and comprehension in delivering accurate test results. More so – the Fluke 28 II Ex is optimised to work in hazardous conditions where flammable or explosive gasses might be present. It can be used in IIC (gas), in Zone 1 and 2 and IIIC (dust), Zone 21 and 22 environments. Of course just like the standard 28 II – the Fluke 28 II Ex is fully waterproof, dust-proof and fall-resistant. With a tool like this you can tackle every situation with no compromises.
Fluke 28 II Ex Intrinsically Safe True-rms Digital Multimeter Features:
- Sealed, waterproof and dustproof shell with IP67 rating
- Withstands fall from up to 3 m (10 ft)
- Designed to meet the IEC Over-voltage Electrical Safety Standard No. 61010-1:2001
- Measurement Category III, 1000V, Pollution Degree 2
- Measurement Category IV, 600V, Pollution Degree 2
- Protective holster can be reversed to protect the display
- Possesses all functions required from modern multimeters
- Can be safely used in ATEX zones 1,2,21, or 22
- Clear and bright 4-1/2 digit display (resolution 20,000 counts)
- True-rms capable
- Measures voltages of up to 1000 V and currents of up to 10A AC/DC
- Low pass filter for more accurate results
- Frequency testing up to 200 kHz and percentage duty cycle
- Resistance, capacitance (up to 10,000 μF), continuity and diode testing
- Conductance testing for high resistance or leakage spotting
- Min/Max/Average and Peak for signal fluctuation checks
- Relative mode for removing test leads interference during measuring
- Automatic/Manual Range selection
- Protection against incorrect lead connection
- Simple to use interface
- Backlit display and keypad
- Very good battery life
- Available with optional magnetic hanger
- External battery doors for easy battery replacement without decalibrating the device
The Fluke 28 II Ex is fully certified to work in hazardous conditions. The device holds following certifications:
- IECEx Ex ia IIC T4 Gb, Ex ia IIIC T130 °C Db, I M1 Ex ia I Ma
- ISA-82.02.01
- CAN/CSA-C22.2 No. 61010-1-04 /UL61010-1:2004, and TUV 61010-1:2001
CE - NIST- traceable calibration report and data
28 II Ex safety and regulatory compliance
Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.
