Fluke 1734 Three Phase Energy Logger

Fluke 1734 Three Phase Energy Logger

The Fluke 1734 is a three phase energy logger that gives you a complete picture of energy usage across a facility, from the service entrance to individual loads. It automatically logs voltage, current, power, power factor and energy, and goes a step beyond the 1732 with fully integrated logging: connect Fluke Connect devices and it logs up to two extra parameters alongside power, from a Fluke Connect wireless multimeter or module. Rated 600 V CAT IV and 1000 V CAT III, it carries the highest safety rating in the industry.

Supplied by Powerpoint Engineering as an authorised Fluke distributor, the 1734 ships with current probes and works with Fluke Energy Analyze Plus software and the Fluke Connect app for download, analysis and remote sharing.

What the Fluke 1734 logs

• Voltage, current and power on all three phases, single or three phase wye and delta
• Energy, power factor and associated values for load and energy studies
• Up to two extra parameters from connected Fluke Connect devices, logged at the same time
• Up to 20 separate logging sessions stored on the instrument

Why the integrated logging matters

Energy problems are rarely purely electrical. Logging an extra parameter, such as temperature from a Fluke Connect module, on the same timeline as power lets you correlate cause and effect in one data set rather than stitching two together afterwards. Energy Analyze Plus then turns it into analysis and automated reports, the evidence behind an energy savings project.

Specifications

Fluke 1734 compared with the 1732 and 1730

Choose the 1734 when you need auxiliary parameter logging on top of power. The Fluke 1732 power logger covers the core power and energy logging without the extra channels, and the Fluke 1730 energy logger is the simpler choice for consumption-only studies.

Calibration and support

• Supplied and supported in Ireland by an authorised Fluke distributor
• Calibrated and repaired in our own lab with traceable certificates
• Backed by power quality and energy monitoring survey services

Keep the logger accurate through our calibration and repair laboratory. Full figures are on the official Fluke 1732 and 1734 datasheet and across the wider Fluke power and energy logger range.

FAQs

What does the Fluke 1734 add over the 1732?

Fully integrated logging of up to two extra parameters from Fluke Connect wireless devices and modules, captured on the same timeline as power. The core power and energy logging is shared with the 1732.

How many logging sessions can the Fluke 1734 store?

Up to 20 separate logging sessions can be held on the instrument, so you can run several studies before downloading and clearing them through Energy Analyze Plus.

Does the Fluke 1734 need regular calibration?

Yes. To keep measurements traceable for energy and tariff decisions, calibrate the logger on a set interval. Our in-house laboratory calibrates and repairs Fluke loggers and issues traceable certificates.