Fluke 1732 Advanced Three-Phase Power Logger

Fluke 1732 Advanced Three-Phase Power Logger

The Fluke 1732 is an advanced three-phase power logger for discovering where electrical energy is consumed and wasted, from the service entrance to individual loads. It automatically captures and logs voltage, current, power, power factor and energy, so you can profile energy usage across a facility and put a cost on it. With the highest safety rating in the industry, 600 V CAT IV and 1000 V CAT III, it connects safely right at the service entrance.

Supplied by Powerpoint Engineering as an authorised Fluke distributor, the 1732 pairs an optimised on-instrument interface with Fluke Energy Analyze Plus software and the Fluke Connect mobile app, so you view data locally then access and share results remotely with your team.

What the Fluke 1732 logs

• Voltage and current on all three phases, single or three phase wye and delta
• Active power, power factor and energy
• Associated values for load studies and energy profiling
• Input ranges of 120 V and 230 V single phase, and 230 V and 400 V three phase

Find and cost energy waste

The point of a power logger is action. Energy Analyze Plus lets you download and analyse every measured detail, identify opportunities for energy savings and produce automated reports. Reviewing data during the logging session, before you download, reduces the uncertainty of whether you captured the right data every time. Fluke Connect compatibility means you can review readings on a phone and keep a safer working distance from live gear.

Specifications

Fluke 1732 compared with the 1734

The 1732 logs the core power and energy parameters and shares data through Fluke Connect. The Fluke 1734 adds fully integrated logging of up to two extra parameters from Fluke Connect devices and modules, and is the upgrade if you need auxiliary measurements logged alongside power. For consumption-only studies, the simpler Fluke 1730 energy logger may be enough.

Calibration and support

• Supplied and supported in Ireland by an authorised Fluke distributor
• Calibrated and repaired in our own lab with traceable certificates
• Backed by power quality and energy monitoring survey services

Keep the logger accurate through our calibration and repair laboratory. Full figures are on the official Fluke 1732 and 1734 datasheet and across the wider Fluke power and energy logger range.

FAQs

What is the difference between the Fluke 1732 and 1734?

The 1734 adds fully integrated logging of up to two extra parameters from Fluke Connect wireless devices and modules. The 1732 logs the core power and energy values and shares through Fluke Connect, but does not add those auxiliary logging channels.

Can I connect the Fluke 1732 at the service entrance?

Yes. It is rated 600 V CAT IV and 1000 V CAT III, the highest safety rating in the industry, so it is cleared for use at the service entrance as well as downstream.

Does the Fluke 1732 need regular calibration?

Yes. To keep measurements traceable for energy and tariff decisions, calibrate the logger on a set interval. Our in-house laboratory calibrates and repairs Fluke loggers and issues traceable certificates.