Arc Flash Coverall, Anti-Static, 12.4 cal/cm²

Arc Flash Coverall|Arc-Flash-Anti-Static-Coverall

Arc Flash Coverall, Anti-Static, 12.4 cal/cm²

SKU: 1795

Description: One Piece Arc Flash Coverall, anti-static, HRC 2, ATPV 12.4 cal/cm², with two slanted side entry pockets, two breast pockets with flap and Flame Resistant (FR) Velcro® closure, one right back pocket with flap and Flame Resistant (FR) Velcro® closure, Aramid 2-way zip front closure, inset sleeves, knitted cuffs, half elastic waist, standard shirt collar.
Optional: 50mm Lime and silver reflective tape on shoulder, biceps and knees

Colour: Navy Blue

Size: S – 5XL
82cm – 152cm

Fabric: Permanently Flame Resistant (FR) UltraSoft® double pre-shrunk, antistatic, 305 g/m².
Cuffs: UltraSoft® Rib Knit.
Thread: Aramid.

Applications: Work wear for the electrical industry where anti-static PPC is required.

Hazard Assessment: Thermal effects from electric arc flash, flames and flash fires.


  • Anti-static.
  • Guaranteed flame resistant for the life of the garment.
  • Water washable.
  • Excellent breath-ability, absorbs sweat and moisture.
  • Cotton comfort – cool in summer and warm in winter.
  • 50% longer wear life than traditional 100% cotton garments.
  • Part of the Survive-ARC® work wear and accessories range.

Fabric: NFPA 70E; ASTM F1506; OSHA 1910.269; EN ISO: 11612; OEKO TEX STD. 100; EN 1149-5 and ASTM F1959.
ATPV¹: 12.5 cal/cm²
HAF²: 76.2%

Arc flash clothing is intended to provide protection from thermal effects of arc flash and this product must be used as part of an appropriate set of PPC and PPE to protect against the hazards of arc flash. This product complies with standards that are intended to protect against arc flash in most situations that arise in normal use. There may be exceptional cases in which even the best protection is not enough to prevent the harm caused by arc flash or the related effects and, although the product meets statutory and industry specifications, the use of this product does not guarantee that the product will provide complete protection in those exceptional cases. If you are in doubt or do not fully understand these limitations, contact the manufacturer for full information. The product may be returned to the supplier if you are not willing to accept a product that is subject to the limitations set out above.

¹ ATPV: Arc Thermal Performance Value. The higher the value, the more insulated one is
from second degree burn.

2 HAF: Heat Attenuation Factor. The higher the HAF%, the more heat is blocked by the

Arc Flash Anti-Static Coverall, 12.4 cal/cm² Datasheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Arc Flash Coverall, Anti-Static, 12.4 cal/cm² Datasheet

For additional technical details about the Arc Flash Coverall, Anti-Static, 12.4 cal/cm² please refer to the product datasheet. Please note that you would need PDF reader to open the file.