The SINEAX A230 comes complete with with System Analysis and is used for the measurement and display of all values of a 3-phase current system. This device also provides functions for system and load analysis by measurement of THD, harmonics, asymmetry, comprehensive average and max/min values.
The SINEAX A220 is used for the measurement and display of all values of a 3-phase current system. It includes 63 measurands with high accuracy (U, I: 0,5%), 2 pulse or trip point outputs (S0), 5 programmable intervals for active, reactive and apparent power (avg. values) and 8 energy counters for active and reactive energy.
The SINEAX A210 is used for the measurement and display of all values of a 3-phase current system. This convenient device boasts 63 measurands with high accuracy (U, I: 0,5%), 2 pulse or trip point outputs (S0), Minimal installation depth of 46 mm and is transformer ratio programmable.
The SINEAX Q531 is a measuring transducer for reactive power. It can be used for the conversion of reactive power in single phase alternating current or 3-phase systems with balanced or unbalanced load. A load-independent direct current or direct voltage is used as an output signal, which is proportional to the measured reactive power value.
The SINEAX P530 can be used for the conversion of active power in single phase alternating current or 3-phase systems with balanced or unbalanced load. A load-independent direct current or direct voltage is used as an output signal, which is proportional to the measured active power value.
The SINEAX G536 is used for the measurement of phase angle or power factor in single-phase or 3-phase electrical systems with symmetrical load. Features include measurement input for sinusoidal, square-wave or distorted nominal input voltage with dominant fundamental wave.