Cable Testing & Diagnostics equipment plays a crucial role in assessing the condition of cables, allowing for proactive maintenance planning and minimising the risk of failures. By utilising these tools, professionals can effectively evaluate the status of cables and identify any potential issues or weaknesses before they escalate into major problems.
Cable Testing & Diagnostics equipment is used to evaluate cable status, which enables pro active maintenance planning and minimiseds failures. See our range of VLF Testers, PD portable systems, high voltage DC test sets, battery ground fault tracers, insulation testers and insulation resistance testers from leading suppliers Megger and BAUR.
The Seba KMT T 99/1 High Voltage Test Unit is a portable and powerful device designed for insulation testing in field applications. It is suitable for testing cables, cable fittings, equipment, and installations. With a maximum DC voltage output of 40 kV, it provides ample testing capabilities. The test unit ensures maximum operator safety with its touch-voltage-proof enclosure and automatic discharge feature for the test object after shutdown or power failure. Its design is also short-circuit proof, making it suitable for cable fault location using the Decay method. Key features include continuous voltage adjustment up to 40 kV, current measurement in three ranges and dual power options with a 12 V battery and 230 V mains operation.
The Seba KMT AC Voltage Test Set T 22/1 is a portable and versatile test set designed for on-site testing. It consists of two separate units: the control unit and the high-voltage unit. This configuration allows for convenient operation without the need for additional transportation equipment. The T 22/1 test set is capable of continuous testing using AC voltages up to 75 kV at 1 kVA.
The Seba KMT NIM 1000 Impedance Meter is a reliable and safe tool used for measuring the impedance of low voltage systems. It is specifically designed for impedance measurements in LV distribution networks. By applying currents up to 1000 A, the meter assesses the network's ampacity at the connection point, helping to identify potential weak areas. The NIM 1000 serves various purposes, including event-based actions to diagnose the causes of unstable power conditions. It can also be used preventively, conducting control measurements before or after network restructuring to ensure consistent power quality and minimise downtimes.
The Seba KMT HV Test Set 50/80/110 kV is a portable solution designed for conducting DC voltage tests on cables and cable installations. The test set consists of an operation unit and an HV unit, and it comes in three different versions: 50 kV, 80 kV, and 110 kV. With its compact and lightweight design, the test set can be easily transported to various locations for on-site testing. The HV Test Set 50/80/110 kV serves multiple purposes, including testing newly installed cables and splices to ensure their reliability before they are put into service. It is also suitable for periodic cable testing and electrical installation testing.
The Seba KMT HV Tester 25 kV is a versatile high voltage generator that provides a variable negative DC output voltage ranging from 0 to 25 kV. It is designed for conducting DC and insulation tests on cables, joints, electrical fixtures, and other equipment. The tester offers great flexibility and convenience with its built-in rechargeable battery, allowing for operation independent of mains power. The HV Tester 25 kV serves various purposes, including testing newly installed cables and splices to ensure their reliability before being put into service. It is also suitable for testing cables that have been disconnected for maintenance or repairs.
The AC Test Set HPA 100 is a powerful test system capable of generating high-voltage AC signals up to 100 kVrms at 50 Hz. It is designed for use in cable test vans and is used for testing cable systems and burning down high-resistance cable faults. The test set can also be equipped with a rectifier attachment for DC testing up to 130 kV. It has a low own noise level, making it suitable for voltage source applications in partial discharge (PD) measurements.
Battery Ground Fault Tracer Battery Test Equipment. The Battery Ground-Fault Tracer is an economical, manually-balanced instrument that identifies, tracks and locates ground faults in ungrounded dc battery systems – on-line
The Megger MIT1020-2 Insulation Tester is a specialised 10kV tester used for testing and maintaining high voltage electrical equipment. It includes diagnostic tests such as polarisation index, dielectric absorption ratio, step voltage, and dielectric discharge. The tester features a large backlit LCD display that is easy to read, providing information such as resistance, voltage, leakage current, capacitance, battery status, and time constant.
The Megger MIT 510-2 Insulation Tester is a dedicated 5kV tester used for testing and maintaining high voltage electrical equipment. It provides diagnostic tests such as polarisation index, dielectric absorption ratio, step voltage, and dielectric discharge. The tester is equipped with a large backlit LCD display for easy reading, which shows information like resistance, voltage, leakage current, capacitance, battery status, and time constant. Additionally, the tester continuously displays the elapsed time of the test, eliminating the need for a separate timer.
The Megger MIT 520-2 Insulation Tester is a specialised 5kV tester used for testing and maintaining high voltage electrical equipment. It offers diagnostic tests such as polarisation index, dielectric absorption ratio, step voltage, and dielectric discharge. The tester features a large backlit LCD display that provides easy readability, showing information such as resistance, voltage, leakage current, capacitance, battery status, and time constant.
